How to Run the GB4000 - A Step by Step Guide
1. Turning the Machine On & Getting Ready
When you power on the GB4000, you're starting at the main control screen. You will know you are on the main control screen when the screen says "Start". From here, you can choose how you want to run the device:
- A single frequency
- A pre-programmed auto channel
- Multiple auto channels in sequence
- A Frequency sweep (blog coming soon)
- Everything begins from this starting point.
2. Running a Single Frequency (Manual Mode)
This is the most basic way to use the machine.
Steps:
- Power on the device
- Press ENTER
- Type your frequency
- Press RUN
What happens:
- The machine runs only that single frequency continuously
- The machine will run that frequency for 5 minutes unless directed otherwise (adjusting run time is explained in section 5.)
- It will stop automatically when the set time is complete and the screen will return to "Start"
Click This link to watch the Video Tutorial:
3. Running an Auto Channel (Pre-Programmed Mode)
Auto channels are stored groups of frequencies that run automatically. This is the most common way people run the GB4000
Steps:
- Press AUTO CHANNEL
- Enter the channel number using the keypad
- Press RUN
What happens:
- The machine runs all frequencies programmed inside that channel
- The machine will run each frequency or each group of frequencies in the channel for 5 minutes unless directed otherwise (adjusting run time is referenced in section 5.)
- It cycles through them automatically without manual input
Click this link to watch the Video Tutorial
4. Running Multiple Auto Channels
This feature allows you to chain channels together in one session.
Steps:
- Press AUTO CHANNEL
- Type the first channel number
- Press the "+" Button
- Type the second channel number
- Continue Pressing the "+" button followed by a channel number until you have entered your list of channels
- Press RUN
What happens:
- The machine runs each channel one after another
- You can build a longer sequence of different frequency sets
Click this link to watch the Video Tutorial
5. Adjusting Run Time
Run time controls how long the machine operates in a session. If you choose to set a run time you must complete these steps before continuing with running an auto channel or individual frequencies.
Steps:
- Type the number of minutes you want each frequency or frequency group to run
- press the desired function (such as Auto Channel) to start.
- Follow the steps for your desired function
What happens:
- If You're Running a Single Frequency:
- It will run that one frequency for the number of minutes you selected.
- If You're Running a Channel with Individual Frequencies:
- It will run each frequency in the channel for your selected run time.
- If You're Running a Channel with Frequency Groups:
- It will run each group of frequencies in the channel for your selected run time.
- If Your Running in Sweep Mode:
- It will complete the entire sweep over the number of minutes you selected.
- Automatic Stop:
- The machine will automatically stop when all frequencies, groups, or sweeps are finished.
6. Putting It All Together
If you're just getting comfortable, a typical session might look like this:
- Turn on the machine
- decide if you plan on running individual frequencies OR auto channels (Most Common)
- Set run time (optional but common)
- Run your channel
- Type the channel number
- Press Run
- Let it complete
- Repeat or adjust channels as needed
Tags: Tutorial Guide Step-by-step GB4000 Run time