Help / FAQ

So, if you are ordering a MOPA Amplifier, please make sure to tell us if you will be taking the machine to a location other than the shipping address that you give to us during the order process so that we can configure your new MOPA correctly.

The only adapter you should need would be a plug adapter to change from the US style plugs included with your new machine to the shape of plugs used in your location.

For shipments to the continental US, we usually ship using FedEx ground.  Depending one where you are located, it can take between 2 - 5 business days for FedEx to deliver your new machine.  In some cases we may instead ship using US Post Office Priority Mail. 

 

For international shipments, we usually ship using FedEx International Priority.  In some cases we will ship using US Post Office International Express, but that is rare.  International Express shipments generally take between 7 to 10 business days.  However, international shipments can take longer to arrive depending on customs practices in the receiving country.

The GB4000 comes with a two year warranty. If the unit stops working within the warranty period, we will repair or replace your unit. This Warranty covers parts and labor required to bring the unit to full working order. For warranty service call the number at the top of this site.

Please see the warranty page  

 

Back in the 1950's they built a ray tube instrument that would run 10 frequencies simultaneously. So running multiple frequencies is not a new concept. This is why we built the GB-4000 to be able to run multiple frequencies. Yet today some unknowledgeable people want to disparage running multiple frequencies. Successfully running multiple frequencies is directly tied to power. If you have enough power then it is possible to do this. Below we have given answers to the most commonly asked questions.

 

Some people have asked - Does running multiple frequencies reduce the power level of each of the frequencies being run? The answer to that question would be yes. This is why we built the GB-4000 with the ability to output 2.7 watts (2.70 watts) of continuous power at a 100% duty cycle using an RF (Radio Frequency) carrier frequency. Using an RF carrier frequency is the only way the power level could be increased. The original 1950’s equipment could only output one audio frequency at a time with only 1/5th of one watt of power (20% of one watt). This power level worked very well with one audio frequency even until today. Logically if you use 2 audio frequencies you would want to double that power level (2 X 0.20 = 0.40 watts) to 40% of one watt. If you run up to 8 audio frequencies you would want at least 8 times that power level or 1.60 watts of power. This is why the GB-4000 has 2.7 watts of power output so that it exceeds the power capability needed for running 8 audio frequencies simultaneously at the original 1950’s capability of 0.20 watts of power for one audio frequency.

 

Some people also ask if they can only run multiple frequencies. The answer to that question is no. The GB-4000gives you the flexibility to switch from running one audio frequency at a time to being able to run up to 8 audio frequencies at a time. You can choose how you want to run the frequencies.

 

Many people want even more power than the 1950’s power levels per audio frequency. If you want more power then you can purchase the SR-4 ten watt amplifier and you will have 1.45 watts of power for each frequency, if you run 8 audio frequencies simultaneously. If you decide to only run 4 audio frequencies simultaneously then you would have 2.5 watts of power for each frequency. And if you only run one frequency you can have up to 10 watts of power for a single audio frequency.

 

If you want even more power than 10 watts then you can purchase the M.O.P.A. gas tube amplifier which is a 120 watt instrument. With this instrument you could run up to 8 audio frequencies simultaneously with up to 15 watts of power for each audio frequency.

 

We look at it as going from good to better to best.

So, if you are ordering a MOPA Amplifier, please make sure to tell us if you will be taking the machine to a location other than the shipping address that you give to us during the order process so that we can configure your new MOPA correctly.

The only adapter you should need would be a plug adapter to change from the US style plugs included with your new machine to the shape of plugs used in your location.

There are three main differences between the GB4000 and other frequency machines:

 

1. Frequency Range:  The GB4000 is designed to be able to actually produce all of the Frequencies that Dr. Rife used in is pioneering research.  The GB4000 on it's own has a frequency range up to 20 million cycles per second.  The GB4000 also has the ability to create an RF carrier signal and modulate lower frequencies onto that carrier like Dr. Rife did in his work.

 

2. Power output:  One of the big differences between the GB4000 and many other machines is the output power capability.  Because the GB4000 uses an RF carrier frequency, the GB4000 is almost 10 times more powerful than most other machines.  The GB4000 has a maximum power output of up to 2 watts.  With the SR-4 amplifier, the maximum output power increases to 10 watts, or up to 50 times more powerful than some other machines.  With the MOPA amplifier and the Plasma Tube Assembly, the maximum power output is up to 120 watts.

 

3. Ease of use.  The GB4000 is designed with the end user in mind.  It has a simple and intuitive user interface with a complete keypad so you can interact with the machine easily.  The GB4000 comes with over 800 chanels pre-programmed and ready for you to use, with room for you to add almost 1200 more.  The GB4000 also has the ability to output up to 8 audio frequencies simultaneously - which can be a big time saver if you are running a chanel with lots of frequencies.